Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,We have successfully implemented a Cisco 2911 running CUBE to connect to Exchange Online Unified Messaging. The only thing that we cannot get to work is play on phone. During the testing done it seems that when Exchange Online places the call to C...
I have an issue with slow performances on a server in my serverfarm. a 'show interface x/x summary' presents me with an ever increasing value for TRTL: throttle count. I have done some looking around and cannot quite find out what this means/implies....
I have a FWSM that seperates various segments on the network. For some reason at times connectivity to some hosts stops without any indication why.I had done some checking and discovered that there seems to be a corrupt XLATE created at times, which ...
Have a scenario where WAAS is being implemented. The challenge we face is this:1. WAAS is being implemented at headoffice and all sites. Each site, including headoffice, have dual routers with dual links into an MPLS environment, and two WAE applian...
Hi,The latest 2.2 plugin file from nessus.org is bigger than the seemed allowed upload size through the Clean Access Manager Web Interface.When I manually upload the plugins through the CAM, I get the following error from the CAM.Result: Error: Faile...
Hi Mark & David,
After my initial post on this issue I did in fact get it working and we have been successfully running it with Office365 UM for the past 3 years. Sorry for nonresponse over the past years -- I am not really active on forums like thes...
This particular module is about 90% connected. I have another blade of the same type in the chassis that is 100% populated and all connected, and we are not experiencing any problems on those servers. The 'show interface summary' for those ports ha...
If you are using DHCP on those VLANs you need to make sure that you allow the following as well in the access-list else your clients will not be able to get IP addresses.access-list xxx permit udp 0.0.0.0 0.0.0.0 eq bootps
You might also want to delete the VLAN database if you had VLANs etc configured by doing a 'delete flash:vlan.dat' and also delete any crashinfo files from sup-bootflash.
Hi Jon, The modules in the chassis is as per the below. Mod Ports Card Type Model --- ----- -------------------------------------- ------------------ 1 24 CEF720 24 port 1000mb SFP WS-X6724-S...
