Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Anyone have good experience with mDNS gw on 9800 with flexconnect-local_switching?As I understand this is a caveat: If I have the devices which announce the mDNS services in for example VLAN 2, clients in VLAN 3 and 4, and APs on a mgmt VLAN 5 then w...
What happens to a RSPAN packet sent to a switch without RSPAN configured, but has the VLAN?RSPAN configured on switch1 with source vlan4, destination vlan5.RSPAN not configured on switch2 or switch3.VLAN 4 is a client VLAN and clients connected to sw...
Anyone know if it is possible for a flex AP to cach wired mDNS that has been centrally learned on the WLC? Or does this only work when the AP is in local mode?
Utilizing ISE 3.1 and using the portals for CWA (centralized web auth).Does anybody know if it is possible to change the guest flow in the portal?
This is what I want to achieve:Default landing page should be the "self registration" page, not the "lo...
I am looking into enabling PMF on a dot1x WLAN, on a 9800 running v17.3.5bIs dot1x SHA2 mandatory for PMF to work or does PMF work with dot1x SHA1?
Found this guide that says SHA2 has to be enabled for PMF to be mandatory, but on the WLC I can set PM...
Anyone know if it is possible for a flex AP to cach wired mDNS that has been centrally learned on the WLC?Figured out it is not possible. Also checked if cached wired mDNS is synced between mobility peers - it is not
Maybe not. I found this script and trying to tweak it to make it work. https://community.cisco.com/t5/security-blogs/ise-guest-login-page-pre-fill-and-hide-password-field-single/ba-p/3658312
