Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi there,Just wondering if anyone knows how to fix a problem with HP IPAQs (H6340) and not roaming from AP to AP.The IPAQ seems to stay with the 1st AP it associates with and only moves to another when it totally losses signal to that access point.An...
Hi all, having a little problem with a 1200 series AP. It upgraded OK and everything was fine. Until I tried to upgrade the IOS, which it kempt on failing on the upgrade (IOS = lastest version). So I upgraded in the command line. now the thing only b...
Hi all,having a little problem with a 1200 series AP. It upgraded OK and everything was fine. Until I tried to upgrade the IOS, which it kempt on failing on the upgrade (IOS = lastest version).So I upgraded in the command line. now the thing only boo...
Hi there,I had the same problem the other day and posted on here. Check out the post called firmware to IOS problem. it explains how to get the image back onto the ap.Alo noticed that the ap failed to bring up the ethernet port, was it connected to t...
Hi there,You should have no problems with a Cisco 350 card in your IPAQ. I have this setup myself with PC2002. I've checked the drivers on Cisco and you hould have no problems:http://www.cisco.com/public/sw-center/sw-wireless2.shtmlHope it helps
No problem,here is what I did:I downloaded the latest IOS for 1200 ap and changed the file as show in the document. Then I copied the file into the tftp diretcory.Changed my IP address on the laptop to 10.0.0.15/24loaded up the tftp server (solarwind...
Hi all,I've managed to fix the problem with this little document:http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_guide_chapter09186a0080184ad5.html#1038660That recovery is for AP's that have been/are IOS that need to hav...
The 1200 AP has been upgraded but wouldn't let me upgrade the version from the web browser. When I upgraded the verion from the command line it failed to boot up.Now I get the boot loader:C1200 Boot Loader (C1200-BOOT-M) Version 12.2(8)JA, EARLY DEPL...
