Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a client device connected to a BR1310 the bridge is wgb mode and auths to an AP1200 using leap, the client can not be accessed across the wireless link.We can ping the client device from the bridge but not from any device across the wireless ...
You do not access the vlan database on router. I'm not too familiar with small router like 870 series, but here is a snip from an 1841.interface FastEthernet0/0 no ip address duplex auto speed auto!interface FastEthernet0/0.1 encapsulation dot1Q 1 na...
I looked up some info on the 870 series and the 878 should support 4 802.1q VLANs on Advanced IP Services IOS image.Product data info indicates the unit has 4 port integrated switch and this should serve your requirements for the 2 vlans.You will con...
From this output it appears that your clients are trying to connect to the inside interface of your VPN GW, if they are remote clients then they must connect to your outside(public) interface before authentication if this is so then it is simple clie...
Hello, The problem was with the IOS, I found a few versions that had these same issues.The following information is what I forwarded to TAC. 1200-31 AP - 1310 BR123-4.JA and 123-4.JA2 = yes123-4.JAx and 123-7.JAx = no123-7.JAx and 123-7.JAx ...
I am thinking you must have vip for vpn cluster.arp for mac address of cluster vip and make static arp entry for this in 4507arp x.x.x.x 000.000.000 arpamay work for this situation
