About Juan_Ramon_Perez

Juan_Ramon_Perez · 02-12-2018

HelloI have an issue, with SIP SRST, with the settings that I have implemented the phones enter correctly in the SIP SRST mode, but when the WAN connectivity comes back, they remain in SRST mode. I have updated the firmware version of the phones to t...

Juan_Ramon_Perez · 06-19-2024

I'm going to share with you what I discovered. For an SSID to allow the USE of Flexconnect, enter the SSID in the Advanced menu and activate the FlexConnect Local option. Later on the AP activate the FlexConnect option in the AP mode. Later in ...

Juan_Ramon_Perez · 02-12-2018

Right, I'm using FQDN so this must be the problem, thanks for your help. Best regards.

Juan_Ramon_Perez · 02-12-2018

I don´t have SCCP phones only SIP phones, the problem appears with all the phones, I have to put the command "no voice register global" in global configuration mode to return the phones to the cucm.

Juan_Ramon_Perez · 02-12-2018

Hello, thanks for your attentionThe models are: Cisco 8845Cisco 8851Cisco 7841

Member Since	‎11-08-2017 11:10 AM
Date Last Visited	‎04-15-2025 09:08 AM
Posts	5

User Statistics

User Activity

SIP SRST won't fallback to CUCM once connectivity restores

Re: Flex Connect and per WLAN central switching

Re: SIP SRST won't fallback to CUCM once connectivity restores

Re: SIP SRST won't fallback to CUCM once connectivity restores

Re: SIP SRST won't fallback to CUCM once connectivity restores