Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
version is ncs5500-xr-7.1.2 version=7.1.2 Mon Nov 3 05:46:46.878 UTCNode Type State Config state--------------------------------------------------------------------------------0/RP0/CPU0 NCS-5501-SE(Active) IOS XR RUN NSHUT0/RP0/NPU0 Slice UP0/FT0 NC...
hi all my device is ncs5501 ,I would like to know how I can clear this error RP/0/RP0/CPU0:ios#show platformTue Feb 18 02:14:18.338 UTCNode Type State Config state----------------------------------------...
Event 5400 Authentication failedFailure Reason 22056 Subject not found in the applicable identity store(s)Event 5400 Authentication failedFailure Reason 11514 Unexpectedly received empty TLS message; treating as a rejection by the client
Hi Mr Smilstea,Thanks for you update ~There is an interesting questioninterface Bundle-Ether200 I used two 10G ports for binding. The size is 20GBRP/0/RP0/CPU0:A#show interfaces bundle-ether 200 briefThu Nov 6 07:13:16.762 UTCIntf Intf LineP Encap M...
yes It has been enabled and restarted.It still cannot match the IP address in the class-map and then call it.!!hw-module profile qos hqos-enableipv4 access-list RESERVED_ACL10 permit 103.203.133.0/30class-map match-any CLASS_RESERVEDmatch access-gro...
yes It has been enabled and restarted.It still cannot match the IP address in the class-map and then call it.!!hw-module profile qos hqos-enableipv4 access-list RESERVED_ACL10 permit 103.203.133.0/30class-map match-any CLASS_RESERVEDmatch access-gro...