The following article will show you available packet matching criteria
that can be configured on an NCS5500 platform as part of BGP flowspec
feature.In this regards, NCS5500 will act as a BGP flowspec server and
advertise the criteria to its BGP neighbors...
Feature Description BGP flowspec in a nutshell is a feature that will
allow you to receive IPv4/IPv6 traffic flow specification (source X,
destination Y, protocol UDP, source port A .. etc) and actions that need
to be taken on that traffic (drop, or polic...
I am sure you are all familiar with the difference between P and PX
images that are seen on CCO for the ASR9000. If not, read this
Before going further ...This document describes "BFD over Logical
Bundle" (BLB) implementation on NCS5500 platforms.BLB is supported on
these platforms since IOS XR 6.3.2.For older platforms (like ASR9K or
CRS) running IOS XR, BLB has been supported since...
Hi folks Back in August the Support Forums migrated to a new platform.
As we had set up a "follow" on our XR OS and Platforms section to our
larger Cisco XR escalation team, since that migration we noticed what
felt like a drop in activity in the forums!!...
CSM version 3.5 is now available with new platform support and some new
interesting functionality!! Additional Platforms ASR1K – consolidated
software upgrade mode XR12K – End to end software management with CCO
software download NCS6K – Support eXR packa...
Introduction This document introduces TI-LFA (Topology independent
Loop-free alternate) feature in segment routing environment. It has two
purposes. One is to form an introduction to TI-LFA for those who are
interested in using, evaluating, and possibly i...
Cisco Software Manager (CSM) v2.0 is not able to retrieve platforms and
releases information from Cisco.com. Problem: Cisco.com no longer
accepts HTTP protocol when querying platforms and releases information.
All queries must use the secure HTTPS protoco...
By 2021, there will be an average of 1.75 M2M connections per capita
globally – demonstrating how pervasive M2M connections are going to
become to our networked lives making Internet of Things (IoT) a
reality.The latest Cisco VNI Complete Forecast update ...
Up until 6.1.2, IOS-XR sshv2 supports only CBC ciphers
That is, if a client were to request a CTR cipher (for e.g.: ssh -c
aes128-ctr -l dpullat 220.127.116.11), IOS-XR will cl...
The latest, 2017 Cisco Mobile Visual Networking Index (VNI) forecasts
seven-fold increase in mobile data traffic from 2016 to 2021. This is
driven by increase in mobile users, devices and connections, speeds and
multi-media consumption. How is the evoluti...
With release 6.1.3, IOS-XR 64-bit (eXR) brings in the feature of
Flexible Packaging (aka Golden ISO or GISO). What is it: Cisco releases
IOS-XR 64-bit software shipped with a mini ISO which contains mandatory
IOS-XR packages for a given platform, set of o...
I have a 1 Gigabit static Fiber service from Rogers and they install a Nokia Router which is connected with our Firewall.
Yesterday our facility was intentionally powered down but I was still able to ping ISP Gateway....
Hello All. I have the below ACL applied inbound on a vlan interface, int vlan 808. I would like to match against this ACL in a class-map and then apply it to a policy-map that'll set the dscp 10 for ssh and tacacs traffic. All other traf...
Radius server send access-accept message but BNG is not providing IP to client. [ Using free radius and XRv9000 6.4.2 | 192.168.6.89 is NAS & 192.168.6.80 is RADIUS server. Looks issue is with radius configuration. IPSubscriber without RADIUS works fi...
If you have a 1g interface with, say 500 sub interfaces, all with a QoS policy like below (a simple one just for an example), If each sub interface is transmitting at 2mbps so that the entire 1g link is used do the individual policies recognize that the l...