Hello,I have a situation where i can't grasp some things. I have a Router Cisco ISR 1k connected P2P via /30 public subnet.Behind the Router ISR 1k, i have a Cisco FTD(firepower3110) connected p2p on a /27 public subnet. I have used first 2 public IP...
Hello, I came through a situation for the past couple of days:I have 2 Firewall stages, Core and Perimeter (each stage with 2xFPR3110):Scenario:-My perimeter firewall is point-to-point connected on a /27 public subnet with my Border router that's in...
Hello,I have an issue on a NCS-57C3-MODS-SYS platform. This issue occured when i tried to DOWNGRADE from IOS-XR 7.6.2 to 7.5.2 via CSM Server. After reload, i have a booting loop : GRUB Loader(snipshot attached) -> error output below:================...
tried that... on show media location all, i see that rootfs: that resideds on 0/0/CPU is not emptying that much even after removing inactive pkg.Above remaining space after removing inactive and superseeded. Any advices on how to access and empty tha...
This IP is from that /27 public subnet between perimeter Firewall and border router. Is the IP chosen by sysadmins to be exposed with NAT and accessed in order to reach the DMZ host 10.10.200.60 On my diagram i didnt put the real IPs
