Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good day.
I have a problem. I can't connect to Wi-Fi network through the Android device and other device. For authentication and authorization used Cisco ISE v2.2. Wireless controller WLC 5760 are manages the access points.
On WLC I configured the...
I can't connect to a Wi-Fi network. For authentication and authorization used Cisco ISE v2.2. Access points are managed by the WLC 5760. When device is connected to the network, the device issues Authentication problem. Log WLC 5760 are here:
Mar 5 ...
When you said you changed the vlan it means the interface on wlc or the dhcp snooping config? I'm change interface on WLC, dhcp snooping I did not touch. At the moment, the configuration dhcp snooping as follows:
no ip dhcp snooping
no ip dhcp snoopi...
I changed the vlan 311 as you advised, but the result remains the same as I did before and published earlier. Client connects to the network and then immediately drops.Configuration dhcp snooping on my WLC 5760 as follows:
no ip dhcp snooping
no ip d...
In the attachment configuration WLC 5760 and ISE. Thanks for the instruction. please explain which particular parameter affects the inoperability?
Thank you
In the attachment client status on the WLC.Can you also share the authorization profile you're sending via ISE?
I'm use the default authorization profile (PermitAccess). Unfortunately, it is not possible to view it in detail. In the attachment config...
Thanks for your comment.
In my network only one SSID does not work, others SSID is work and connect to the network.The only difference is that a non-working SSID is authenticated via ISE, other SSID authenticated via daloradius. Via daloradius client...
