About wpharaon

wpharaon · 02-18-2007

Hello experts,Playing around with Frame Relay, I noticed that setting an end to IETF encapsulation, while other end configured to CISCO encapsulation, won't do any harm: s2691#sh frame- mapSerial1/0 (up): ip 172.16.0.1 dlci 301(0x12D,0x48D0), static,...

wpharaon · 11-24-2008

ediortiz,yes Cisco 1841 doesn't support the double-wide form factor (i.e. HWIC-D-9ESW), it supports 2 Single-wide HWICs!

wpharaon · 08-25-2008

Hello,This is the normal behavior as AAA is configured on your console server, and by default the authentication configured is applied on all lines, this behavior is not what you require on a terminal server, soOn the console server, configure:aaa au...

wpharaon · 02-20-2007

Sundar,The command to display the CIR of a PVC is "show frame-relay pvc X" where X is the DLCI number, which should be specified to display the CIR, bc, be....In addition, the LMI type has no relation. This would work with three types of LMIs.show fr...

wpharaon · 02-19-2007

After some debugging of Frame Relay packets, I found what exactly is going around.Simply Cisco Routers understands both encapsulations whatever we configure; So setting encapsulation only influence outgoing packets not how to analyse incoming packets...

wpharaon · 02-18-2007

Hello Jsayer,FD = 256 * ((10000000/512) + (20000/10)) = 256 * (19531.25 + 2000) = 256 * 21531 = 5511936Cisco IOS? rounded bandwidth calculation to 19531 so it give's exact mentioned FD.

Member Since	‎08-14-2004 07:55 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	13

User Statistics

User Activity

Frame Relay encapsulation

Re: 1841 interface modules

Re: 3620 Console Server - Double Auth issues....

Re: Frame-Relay

Re: Frame Relay encapsulation

Re: Eigrp metric calculation