Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Does anyone know if a workgroup bridge/non-root bridge will pass information to back and forth to a WAP that is downstream from a non-root bridge through a switch connected to the non-root bridge. I have verified network connectivity between all dev...
This question is concerning a standalone switch using port fa 0/1-24. If I leave the default vlan1 configured on all fa0/1-24 ports, and connect port fa0/1 to vlan 10; then the other 23 ports will also assume vlan 10 connectivity. If I disconnect por...
What could cause "show cdp nei" to no longer work after changing from switch access to trunking and vlans? I change my network from a single vlan (router with two secondary interfaces configured) with 3 subnets - -to 3 separate vlan interfaces and t...
I am a newbie. Need syntax help creating access list to forward & capture all data hitting layer3 from multiple Vlans 2,3-6,7. Need syntax help creating a capture port (Gig 3/3) to send the capture data to a Cisco 4325 sensor. Does the capture port ...
I have attached a network diagram. Maybe this will help you understand. The WAP that does not discover the WDS has station-role root for a setting. The config this WAP worked at a client before. The only difference is there is a bridge between it ...
Lets take this a step further. This 3560 is in a test lab and assume vlan 10 would be coming from a production network and vlan 20 is the test lab on wheels. The default setting for the switch would be vlan20 for work inside the test lab on every day...
I have all my native vlans identical. It is strange that doing a "sh cdp traffic" indicates these devices are advertising, because I see the output counters increment, but the input counters are on "zero" yet. I have verified all devices are running...
Thanks for staying with me on this. I have gone thru my whole environment and cleared all the connecting interfaces, found a couple of interfaces run V2 cdp advert., changed everything to disable V2, cleared cdp counters. I noticed where "cdp nei" ...
