Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,The problem I am having is that I have 2 x 350 bridges set up with a Data Vlan & a Voice Vlan connecting 2 buildings. The Data works ok but the voice drops out occasionally. Cisco IP phones at both sites but connected through 3com switches. I have...
I have a problem on a customer site with an Intel(R) PRO/1000MT network card connecting to a 3700 switch.The problems I am encountering are as follow'sWhen using DHCP on a machine it is unable to connect to the Network sometimes, Roaming profiles not...
When setting up CMS one of the 2950 switches became unavailable. When I investigatedthe switch via the consol port the following text kept appearing.%IP_SNMP-3-SOCKET:can't open UDP socket.I suspect that this is what problem is. Does anybody know a f...
Hi This may be a bit late but I had a similar problem when any machines attached with intel Pro/1000T cardsfitted. I set all user ports with portfast and also configured bpduguard to prevent the portfast ports being used for uplinks.Regards
Thank you for your assistance, issuing the no snmp-server command worked. I also had to remove the switch from the cluster using the CMS software and then re-add it again.Many thanksDerek
