Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I'm trying to automate some CIMC CLI commands to show the inventory of C-Series servers, i.e. show CPU, show hdd, etc. Typically I use Putty to SSH to the CIMC and run each command manually. I'd like to automate this process and save the results ...
Hi, I'm trying to connect UCS to an MDS 9124, but can’t get the UCS WWPN’s to show in the MDS flogi database. I (believe) I have my vHBA & vSAN configured correctly and NPIV is enabled on the MDS. I’m not using port channels and I’m in FC end-host mo...
Does anyone know of a way to collect and export (xml, txt, etc) the physical inventory and system settings of a rack server? Both the CIMC and the SCU provide a lot of great information but no way to export it in readable file. HP has a utility calle...
Hi Dave, You're right, Oper mode from the 6248 shows as E and I was in FC Switching Mode. - I must have been bleary-eyed and tired as I really thought I had that set back to End-Host-Mode (I had changed to FC Switching as I was trying to troubleshoot...
Hi John, I have the MDS ports configured for Auto mode. When I force the port to f-mode, link immediately fails. In fact any mode other than Auto seems to fail. But in Auto, it's picked up as an ISL port. I'm using the default interop mode on the vs...
Hi Reginald, Thanks for the reply. Yes the vHBA's are pointing to the vSAN (ID is 1996, so I believe I'm within the usable range) and the service profiles are applied and powered up. Also the WWPN's are derived from my pool and show up on the service...
