Hi,Actually the best option to accomplish what you are trying to do is by installing a 1750, 1751,1760 or 2600XM with a NM-1V (only for the and the VIC-2FXO card that you already have, other solutions are more expensive and not an option for a small...

Hi Drummond,Unfortunately your router does not support Voice HW, here is the link where you can find this information:<http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a00800e73f6.shtml>Unfortunately there is not an FXO car...

Hi,There are some FXO's supported by a 1721, I would like to know the correct part number of the card in order to determine whether or not this is supported by your system.Regards,

Hi,I would like to see the sh version output as well as the sh diag, it could be a problem with the MoBo (probably it got faulty during the outage and then no interfaces are recognized anymore), all the interfaces are down/down or a problem with the ...

Hi Samuel,If the IOS of the 2503 is damaged, usually the router will boot up in boot mode, if this is the case then you have to download a fresh copy of the IOS from CCO and upload it using TFTP, if the router is stuck in rommon then the procedure is...