About ingvar001

ingvar001 · 02-17-2020

We are trying to set up a VPN connection to our cisco 867-VAE-K9. The VPN used to work fine, but recently the line-type changed (ADSL -> VDSL). We've made some changes to the configuration and the internet-connection is ok, but we are unable to conne...

ingvar001 · 12-09-2014

Hi All,I need to create a remote access vpn tunnel to a cisco 866VAE-k9 (interfaceport GE0).i have tried multiple configuration options like i found them in the documentation, but wasn't able to get it to work. the current setup is:866VAE-k9 LAN ip: ...

ingvar001 · 02-20-2020

Hello, It turned out to be an issue with the static translations. removing the translation for isakmp fixed the problem thanks for the help

ingvar001 · 02-20-2020

You fixed my problem.The static translation for isakmp caused the negotiation to timeout.After removing the translation the vpn works.Thanks for the help.

ingvar001 · 02-20-2020

@Richard Burts wrote: I am guessing that entry in the routing table was the result of negotiation of the vpn by Shrewsoft. Since the negotiation was not successful there is no routing entry. I believe that the client would be able to reach the vpn us...

ingvar001 · 02-19-2020

Hello, To be sure i didn't miss any changes, i compared the working vpn config with the not working config.The differences between the 2 configurations are:ATM0 is shutdown in the not working config.interface Ethernet0.6 is addedinterface Dialer0 has...

ingvar001 · 02-19-2020

After adding the route manually, i can see it in the route print. running the debugs on the router still don't give any useful information. The output is the same as before. I've tried all the options from 'debug crytpo isakmp' and 'debug crypto ips...

Member Since	‎12-09-2014 05:30 AM
Date Last Visited	‎02-20-2020 08:28 AM
Posts	14

User Statistics

User Activity

issue setting up VPN after changing line-type

remote access vpn on cisco 866VAE-k9

Re: issue setting up VPN after changing line-type

Re: issue setting up VPN after changing line-type

Re: issue setting up VPN after changing line-type

Re: issue setting up VPN after changing line-type

Re: issue setting up VPN after changing line-type