Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi to all!I'm used to set VPN in "site to site" config. but don't have an idea about mobile VPN for laptops' users.I want to give access to exchange (through outlook) and shared files from outside network to roaming users.I've a CISCO PÏX 501 with 3D...
I've this reponse on the "outside interface" after activate a "debug pppoe error" on a PIX 501 which can't connect to DSL in PPPOE CLIENT mode.Thank you by advance
Hi all pix gurus..!I've set my 501 as shown on the cisco docs (how to set the pppoe client) with a static IP but after a couple of days the connection is out!! Sometimes I can ping outside servers on ip but there's no DNS resolution and when I try to...
One of my customer have a Cisco PIX 501 I have to set-up for VPN but the previous IT company didn't give to him the password...I've tried to recover it with the usual process (np.bin) but I don't have access through console port (I have the blue cabl...
Hy all!I become crazy, I d'ont understand what's happen...I've set my pix 501 to connect through my DSL modem in bridge mode and I've starting to connect but the connection hangs off sometimes, not really disconnected but i.e I'm unable to resolve ou...
Thank you for this answer....I'm ok to set in static mode my outside interface but which gateway (ISP) does I have to set the default route..??? I don"t really know it..?The first time I connect it was 195.115.91.21 and the second time 195.114.91.22S...
Hi again!Since my last problem, I have some DNS problems.. I can ping from a PC to outside on IP but not on hostname...And when I ping from the PIX 501 to the actual AC it's "no response".... and the ttl is 1000ms in place of 200 ms..Help me please.....
Thanks to all contributors....I've found the problem: The blue cable or the serial connector was dead...!I've connected another cable and connector and can connect and stop the boot process.