Hi,How can I load and activate a new certificate to an existing ssl-server without affecting the service.I just got the information that I have to suspend the ssl-proxy first.Thanks,Matthias
Hi,when will it be possible to configure multicast-routing on a FWSM running in multiple context routed mode ?Currently it's just possible for single routed modeThanksMatthias
Hi,I have two C6K with CSM-S in place. After I have imported all the certificates and keys on the SSL daughter card of the primary CSM-S I want to synchronize this with the SSL daughter card of the secondary CSM-S. There's a way to synchronize the co...
Hi,I've a PIX 535 (6.3.4) with an ACS 3.2 in place. I'm using TACACS+ with external Windows User DB for authentication. I've installed the Cisco VPN Client 4.0.3F on my PC. When I connect to the PIX a logon windows prompts for user id and password. W...
All,I've configured a outside-to-inside nat as follwing:interface FastEthernet0/0 ip nat inside!interface FastEthernet1/0 ip nat outside!ip nat pool pool-TSI2ARCOR 10.192.48.1 10.192.63.254 netmask 255.255.240.0ip nat outside source list 2004 pool po...
Here it is:access-list 2004 permit ip 10.144.255.128 0.0.0.31 10.14.0.0 0.0.0.255access-list 2004 permit ip 10.144.255.128 0.0.0.31 10.14.5.0 0.0.0.255access-list 2004 permit ip 10.144.255.128 0.0.0.31 10.14.6.0 0.0.0.255access-list 2004 permit ip 10...