Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am planning removing an active Algorithm from the SSL settings on our Cisco ASA's.We have people connected (approx 100).If I drop the active algorithm but users are connected using this algorithm, what will happen?I am trying to work out if i need ...
We have a site that would like to have controlled wireless guest access.Approximately 15 access points would be required at site and they have an ADSL2 broadband connection thatalso requires a router.I have looked at the 800 series ISR with adsl port...
We have recently acquired a Mobile License for Our asa's (8.4).They are now able to connect but I am unable to get PRE-LOGIN checks or Dynamic access policy host checking to work.All documentation points to the fact that this should be possible on IP...
Hello,We have recently purchased Cisco NCS Prime for our Cisco Wireless project. Before installation we need to confirm that NCSprime will be compatible with ESXi v5.0, as the release notes refer toESXi v4.0 and v4.1 only. http://www.cisco.com/en/US/...
Is there any way that anyconnect 2.5 can call up a dial up networking connection prior to logon?I know that Secure Mobility 3.0 can do this but not with WWAN (windows 7 gprs) connections.We have users on anyconnect 2.5 that are using SBL but their mo...
A big thanks for all the advice.I have gone with 1600i for the AP's. Daisy chaining 2960 poe switches off the existing switching lan.For the WLC i'm going to try the 3850 as it was the best buy for POE + WLC.I will go with the 896 Router for ADSL co...
Documentation for the ipad's from Cisco seem to point that it will work? That was why we were trying to fix the issue.If this is not the case please let me know.ThanksSamRelease Notes for Cisco AnyConnect Secure Mobility Client 2.5.x, for Apple iOS ...
I thought it was going to be difficult.I was thinking that if i create 2 tunnel groups and they both use the group-url feature it might work?If i create group url's as follows:1. ras.remote.co.uk/tunnel12. ras.remote.co.uk/tunnel2Then the user at org...
