Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
In November we upgraded hundreds of our MS250-48FP firmware from MS 16.9 to MS 17.2.2. Almost immediately after coming on line the switch began logging entries every minute:sample:Jan 20 09:40:39 PoE budget changePoE budget changed from 0W to 740WJan...
I am having trouble finding documentation on port assignments for SFP modules 13 and 14 on the MS130-12X. They appear to be configured as additional ports for use although I am not currently using them or testing them. If I configure these for optica...
The order of operations I used to troubleshoot this was:1) Reboot switch with PoE subsystem problems from the Meraki dashboard. This did not effect any other switches except for a momentary stack election where it dropped a few frames. The MS250 came...
Yes, it was just this one switch. The next morning following the upgrade all Cisco 8851 phones (15 watts) were off with no PoE. Had to migrate all those devices to other switches of the same make and model that were not effected. Very random.
