Experts ,I am trying to establish a Site 2 Site VPN btw our Pix 501 6.3(5) to customer , pix 515 (8.x) , they have provided with followingDH Group5AuthenticationESP/SHA/HMAC-128Encryption3DESIKE-ProposalIKE-3DES-SHADigital CertificateNone (Presha...
we have configured IPSEC Remote VPN on ASA 5510. Remote client is able to successfully authenticate and establish a tunnel , however user will not be able to ping any inside Hosts . As troubleshooting measure , i did enable ICMp trace 255 , i see th...
Hello , we have a configured a Ipsec tunnel btw Pix and checkpoint peer on other end( 206.201.227.92) . Tunnel comes up fine (phase 1&2) . But when other end tries to FTP to our server 209.216.213.149 (for that matter any traffic), i see packets comi...
We have configured Etherchannel to bind 3 Fiber ports that are trunked btw 6509 & 4507. I can see all the three ports part of the Etherchannel/portchannel. But my concern is when i check output for: - "Sh int portchannel 1" , i noticed the speed s...
hello , We have a VPN btw ASA and Cisco 871 .This ispsec tunnel is up and functional , i can ping the Devices from both sides without any issues , but when we use Xterm or any other chatt protocl we get kiccked off at times , so when i ran a Test...
Good Morning Ivan , First of Thanks for responding to my Question , Yes i have couple of VPN's that are working fine , Infact I got any e-mail back from the Customer saying that they had to change the IKE Encryption on thier PIX After that VPN Cam...
I tried that too , but no Luck . So i went ahead and opened a Case with TAC ,I will keep you posted on it ..But again thanks a ton for helping me on this issue , if you ever visit Atlanta ,Beer is on me .
yes i have tried both directions ..192.168.14.0 (remote client) ---> 10.x.x.x (host behind firewall_10.x.x.x (host behind firewall)--> Remote client . No Traffic at all .Yes , Remote USers connect using Cisco VPN Client 5.03XX version No , Stateful ...
First of all , i have no words to Thank you !!You are correct ,Ideally we should be able to ping the Remote Client from the ASA Atleast . I think that 10.10.0.0 is not going into the ipsec tunnel when the destination iip is 192.168.14.0 for some rea...
