Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all,I have a question regarding our LWAPP WLAN system. We use a WLC with Web Authentication Guest WLAN enabled.Whenever our "Ambassador" creates user accounts, the expiration timer starts running immediately.However, we would like to change thi...
Hello,I have got a Cisco 2821 ISR running 12.4(9)T with CME 4.0 on top of that. The router has one VIC-2BRI-NT/TE and one VIC-2FXS as interfaces.The BRI ports are connected to the PSTN. To the FXS ports fax machines are connected. Several 7940 ip pho...
Hallo,I am not sure if the thread title is correctly worded, so I will try to explain my problem.I have a ASA 5510 plus that runs several VPN tunnels from Outside interface to Inside interface. these work fine. Now I want to access one server in the ...
Hello,we have the Call Back Feature installed on our CCM 4.0(1)ES30 for ove a year now and it has always worked fine.Now it hat ceased working. Whan I press the Call Back Button on our phones (7940/60/70) I get the message "Service not active".I have...
Hello,I have about 60 AP350 VXworks deployed. 350 series clients connect and authenticate via EAP-TLS. Those of them which are heavily in use reboot ccasionally. I do not have any hint why, of course the logs are purged at reboot. There is no regular...
Hello Rob,thanks for your help. Unfortunately we do not have a WCS at this time. So it seems I have to live with the limitations for now.Best regards,Eyad.
