Hello mrssec323,I see that the port forwarded for the WAP200 is 3004-tcp. Is 3004 the internal and external port forwarded to the WAP200? If so, then you may want to try using 3004 for the external port and 80 for the internal port.Regards,-Van

Hi David,It is possible that it could be a default gateway configuration on the WAP200. However, I think we need some more information on how mrssec323 is trying to access the WAP200 specifically.      Mrssec323 does say,      "There are several node...

masterwu69, Yes, for Inter-VLAN routing to work the configuration would be the following:       Clients on VLAN 1 - the gateway would need to be 10.10.20.1  //This needs to be the router because it could cause a routing loop if the clients set t...

Rich,Yes, that is correct. The default VLAN will be marked as untagged across the trunk and any other VLANs used will come across the trunk as tagged.Regards,-Van

Hello mrssec323,What do you mean by "...from outside gives a 404 return." Are you trying to access the WAP200 from a remote location such as your home or a hotel or are you trying to access it from outside of the building via wireless? If you are try...