Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Everyone,We have a video infrastructure where1)vcs control x7.12)cucm3)sme session manager editioncall flow between endpointsvideo endpoint->vcs control->cucm zone->cisco session manager edition->cucm->cisco iphonesproblem facing1)while calling to...
Hi Everyone,we have a video infrstructure in which there is a1)VCS control verX7.12)VCS expressway ver X7.13)TMS 13.2we have recently upgrated tms 13.1 to 13.2 and installed TMS provisioning extension on TMSAfter installation of provisioning extensio...
Hi Everyone,We are using VCS starter pack for login jabber video clients from outside using external ip address and able to login successfuly and initiate video call using old movi version 3.1 but when we are using new jabber video version 4.4 ,its ...
Hi Everyone,We are getting issue in login VCS expressway over internet ip, it gives login expire error.but it is working when we browse over local IP.We have cleared all the browser history but then also its showing the same error.Please suggests wha...
Hi Everyone,We have a one video product c20 and last few days we are facing an issue of rebooting Whenever someone plug or unplug the LAN cable from the LAN port ,it starts rebooting itself and gets hang frequently.Will factory reset helps in solvin...
Hi Alok,Thanks for your advicenow we are to see the H.323 id after changing the id value on endpoints.But the problrem is that there are more than 70 video enpoints in different locations so it become difficult to manually change the h.323 id on each...
Hi Alok,After doing a change in H.323 id value as [email protected] ,we made a audio test call between tandberg mxp1700 and ip phone 7942 but it showing the same thing unknown no on ip phoneand If we do the vice versa ,making a call from cisco ip p...
