Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi There,
I have worked on SFR by
reimaging the SFR to 6.1.0;adding the SFR license;updating the SFR services;setting up the service policy for all traffic from each context to SFR on monitoring mode;
But I can't see any traffic in SFR report portal ...
We are migrating the Cisco IPsec VPN client to Cisco Anyconnect (SSL VPN) from ASA5510 to ASA 5525x, the new solution is working fine with no trouble in relation to connectivity. The Anyconnect VPN users are able to connect the corporate network.Howe...
Hi ThereI am working on a task of redirecting any uncatched http traffic to Symantec public transparent proxy through Cisco ASA. For the definition of uncatched http traffic, we have inbound squid servers for deploying IE proxy pac and redirect the h...
I am facing an issue which user needs to re-authenticate before the session/idle timeout.Here are the informationWLCx1Model - 4402Software Version - 6.0.196.0Emergency Image Version - 5.2.157.0APx30Model - 1252AGBoot Version 12.4.10.0IOS Version 12.4...
Hi Collin,
Thanks for your assistance on this matter, much appreciated.
The issue was resolved. Although I used the default policy but I didn't enable the log on the rule, thus the dashboard didn't show any data.
George
HI JulioThanks very much for your prompt response.I have updated rule#1 with different definition for network object and service object, reloaded the device, however rule#2 UN-nat still kicked in first.Any suggestion?Qing Yu
Thanks Stephen,I've turned on the client debug with the following debug flags enabled:dhcp packet enabled. dot11 mobile enabled. dot11 state enabled dot1x events enabled. dot1x states enabled. mobility handoff enabled. pem events enabled. pem ...
