About cesarestan

cesarestan · 08-18-2022

Hi I' m traing to add a switch c9200 48p in stack but i receive error because 2 switches are in INSTALL mode and new is in BUNDLE mode. Switch Ports Model SW Version SW Image Mode------ ----- ----- ---------- ---------- ----1 56 C9200-48T 16.12.3a CA...

cesarestan · 05-11-2017

Hello I need to give priority on a vlan for video on trunk port. So in case of overload on trunk, the port drops packets of other vlans but not packets of video vlan If i'm right before I need to mark packets with right priority on port and after mak...

cesarestan · 01-15-2014

HelloI have Cucm 9.1.2.10000-28 and I have CSF device for PC Jabber.When i make an externalcall on mobile the I remove prefix 0 and add 98 followed by mobile number,on VG I have the following dial-peer!dial-peer voice 31 pots tone ringback alert-no-P...

cesarestan · 08-19-2022

Thanks to Jitendra Kumar and Leo Laohoo for reply. The solution of Leo it is ok but before to give this command "install add file bootflash:IOS-XE_filename.bin activate commit" i need to correct boot system variable. So The stack is in operation, to ...

cesarestan · 05-11-2017

so i make under access port i have this command : auto qos video (cts,ip-camera,media-player) i think for me is good ip-camera parameter But i have another problem.... I have etherchannel so i have 2 trunk port bundled... In this case auto qoS does ...

cesarestan · 05-11-2017

Hello thanks for your help. So you mean under video port i mark all traffic with AF41 or cos 5 with this command? Interface x/x/x swicthport access "vlan video" mls qos trust cos "enable " mls qos cos 5 "mark" on trunk i make just this com...

cesarestan · 01-15-2014

HelloI make in service parameter Always Display Original Dialed Number in truewith this parameter in true works and on jabber i have 03xxx on display and in history too.

cesarestan · 01-15-2014

HelloI did understand how the voice traslation will be used in my issue.Just make trasformation of number from client Jabber to VG:client make 03xxxxx (mobile call) -> mach pattern 03.! predot and prefix 98 so i on vg i have 983xxxxin following dia...

Member Since	‎07-29-2005 04:57 AM
Date Last Visited	‎08-24-2022 12:01 AM
Posts	8

User Statistics

User Activity

cisco 9200 C9200-48P v-mismatch mode

qos on trunk

Display called number on Jabber PC

Re: cisco 9200 C9200-48P v-mismatch mode

so i make under access port i

Hello thanks for your help.

Re: Display called number on Jabber PC

Re: Display called number on Jabber PC