About johnmedcraft

johnmedcraft · 01-07-2016

Hi everyone - currently got a 3650 switch that is failing to upgrade to code cat3k_caa-universalk9.SPA.03.06.03.E.152-2.E3.bin. once copyied to flash: and added the boot system command (boot system switch all flash:cat3k_caa-universalk9.SPA.03.06.03...

johnmedcraft · 06-11-2020

Hi Vamsi - I hope I understand your question. so after swapping the switch your AP is now saying it is operationally up and you are not seeing a preconfigured SSID is this correct? If so they way the 9800 works with wireless network has changed. B...

johnmedcraft · 06-11-2020

Hi Vamsi - During the install, did you select the country code for the AP the default would have been US? John

johnmedcraft · 06-10-2020

Hi . it looks like you hit a bug.https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvs23163/?rfs=iqvred Are you able to upgrade to 16.12.3. John

johnmedcraft · 06-09-2020

Hello, a couple of questions: what version of code are you using? with HA are you using RP or RP + RMI?when your disconnecting the fiber link is this in the trunk to the switch or the RP port between the controllers? john

johnmedcraft · 06-06-2017

Hi Andrew if you want to connect to the CLI with no configuration then you need a console cable. Now you have converted that AP to a mobility express AP you should see the SSID I mentioned once it powers up. If you have more questions please post :...

Member Since	‎11-23-2009 04:55 AM
Date Last Visited	‎09-16-2021 02:16 AM
Posts	30
Total Helpful Votes Received	10

User Statistics

User Activity

3650 Switch Upgrade Failure

Re: AP - Operational Status is Down in WLC 9800

Re: AP - Operational Status is Down in WLC 9800

Re: AP - Operational Status is Down in WLC 9800

Re: Catalyst 9800 cluster does not failover when losing connectivity

Hi Andrew