I have a L2L tunnel established between a pix and 3020. Everything is working but TCP. I did a lot of tinkering on the 3000 running 4.7 and could have inadvertently caused this, perhaps? The ACLS and debugs on the pix/router side are showing TCP i...
I have a lan 2 lan tunnel configured with a pix. The tunnel comes up and I recieve traffic, but nothing goes back out. I have the routing configured correctly. When I initiate traffic from the inside I see it pass my firewall to the concentrator, ...
Getting the following error when trying to authenticate to VPN 3020: Xauth required but selected Proposal does not support xauth, Check priorities of ike xauth proposals in ike proposal listNot really sure what this means.
I have an operations groupo that needs to suspend and activate services from time to time and I would like to limit them to only those functions while using the web management for the css via ACS/Tacacs+. Is this possible?
I have dot1x port authentication enabled on a 3550 and it works, sort of. My XP workstation can access the network (I can browse, ping, telnet) but the domain login script does not run or has timed out and I lose my drive mappings. Any suggestions?
It ended up being a checkpoint problem on my end. Clear it up and things are working when I pushed a new rule. Thanks for the confirmation that the VPN3K doesn't do protocol filtering, it helped me elimiate the VPN3K.
I'll check this out with my partner on the other end and see what he says about his acl. I think this confirms for me that the VPN3K really only forwards packets and doesn't do much in the way filtering at the protocol level. I'm pretty sure once w...