Sawmill does not automatically prune data from the data base. However, you can schedule various DB maintenance tasks from within sawmill.Josh--Is there a Sawmill reference that describes how to do the pruning? I didn't see anything that looked quite ...

It works for AAA, but you could setup the PIX to authenticate telnet sessions via TACACS+ or RADIUS so the telnet clients would see your prompt.

Mike--pixfirewall(config)#auth-prompt [accept | reject | prompt] [text_string]where "accept" identifies the message displayed after successful authentication, "reject" identifies the message displayed after failed authentication, and "prompt" identif...

Cisco's document isn't terribly detailed, but http://www.cisco.com/warp/public/110/atp52.html#pix_auth is where it's located. Basically, you write an access list defining what traffic should be authorized, and then reference that ACL with the 'aaa au...

Are you using an access list to define what traffic should be authorized, or are you using the old 'aaa authorization include . . .' command?