About shkemp

shkemp · 03-03-2015

I have a new SG300-20 that I installed on March 1st, the installation went fine and it acquired an IP address from the router (DSL modem) and I accessed the switch and setup SNTP, new user, saved configuration and logged out Worked fine on Monday log...

shkemp · 03-09-2015

Thanks for your recommendation, I'm going to do that when I upgrade the firmware later this week. The switch has been running fine now for 6 days with no problems as a DHCP client. No idea why or how this problem happened, just glad that everything...

shkemp · 03-04-2015

So, I cold started the router and switch after 20 minutes. Router first, then switch and the switch acquired an IP address from the router. I checked the logs and nothing out of the ordinary. I then ran FindIt and the switch showed up.I'm going to...

shkemp · 03-04-2015

I tried FindIt and nothing was displayed, it couldn't find the switch. Yes the switch is still passing traffic. I'm about to take the network down and restart everything, I'll let you know what happens.

shkemp · 03-03-2015

I'll try that, however on Sunday and Monday, I was able to view the switches IP address when I logged into the router (DSL modem), now I do not see the switch listed as an attached device.Should I set a static IP address for it? My other choice is t...

Member Since	‎03-12-2010 08:39 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	5

User Statistics

User Activity

SG300-20 won't acquire IP address

Thanks for your

So, I cold started the router

I tried FindIt and nothing

I'll try that, however on