Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,We are seeing some strange behaviour, when doing a failover (and failback) with our MX85 (MX18.211.5.2). It happens specifically with ICMP flows, and only resolves when we reboot both MX'es to clear all flows.We are seeing this when we do a failov...
Hi,We have two warm spare sets in our DC's, MX-A and MX-B. They are set as VPN concentrators, as hubs connected to spoke sites and each other. The two DCs have an interconnection, and MX-A and B can reach each other over their Lan IP as well as over ...
Hi,Lately we have been seeing a lot of snort blocks of traffic which seems to be 'reversed'. With no specific NAT rules configured it seems that internet hosts are able to reach internal clients on specific ports. For example:Source: 84.54.51.37:4971...
Hi,Can anyone tell me what happened to topology 2.0? It's no longer avalaible under early access?I tried to search for any information, so far haven't found it.Thanks,
Hi,Does anyone know if there is better policy/source based NAT configuration options coming to MX?We would like to define the specific outgoing IP-address per subnet or Vlan. This is possible to do but only per host with 1:1 NAT. It's also possible t...
@sslayton you cannot split subnets within VLAN's, so you have to create either separate VLAN's for the subnets, or do something in the way Philip is proposing. All of this possibly breaks client - client connectivity which you might need, especially ...
Hi Rabih,You can use the color codes, like '#d0d0d0', to fill the colors in Visio:<style>.a{fill:#d0d0d0;}.b{fill:"none";}.c{fill:#060606;}In Visio: Go to 'Home' -> 'Fill' -> 'More Colors' -> 'Custom' -> 'HEX' <Fill in the value here>You can check wh...
