Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,We have a situation where we see (via sniff) established nfs traffic on allour trunk links. We can see the src and dest ip's, the traffic countsincreasing when certain database jobs runs. We cannot nail down, after theinitial broadcast of the...
I have a 3750 that was once part of a stack of 3750's. I removed it from the stack, erased flash and config, re-imaged, etc. Switch still boots as stack member #2, and of course all ports are gi2/0/x. Where is the stack ID set or reset, in rommon? ...
this ended up being udp traffic. The nfs server never responds to the client, with a any tcp connection, confirmation or keep alive. So, the mac-addy of the server would time out and the switch wouldn't know where it was, and then flood traffic. I...
thanks for the feedback. I had seen this article before. In a simple form, we can see two hosts, both going through one switch, ftp or nfs. The target mac address ages out of the mac table, which causes the flooding. If we setup a ping to the targ...
thank you for the quick response. I did find that procedure, was hoping to not have it as a config file command. We have so many other single 3750's that are solo switches and do not have that command in their config. That looks to be the only way...
