Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a stack of 2 3750G and 2 3750X. I would like to replace the 3750G with 3750X. I would like the new switches to pick up the configuration as there will be no changes. Has anyone done this before and would like to share their experience?
From here http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/15-2_2_e/release/notes/OL32530.html#pgfId-1096532.
12.2(53)SE2 is the minimum version.
From here http://www.cisco.com/c/en/us/td/docs/interfaces_module...
I have 2 routers setup for BGP and want .177 to be the preferred route. How can I accomplish this? No matter what I tried .178 always wants to be the preferred route. I have tried changing the local-preference but that doesn't help.Attached are the 2...
Just received a new ASA5505. Turned it on. Try to ping 192.168.1.1 from console which is int vlan1 IP. Timed out. Show route only show the loopback int. Any ideas?
Thank you for the kind help.177sh ip bgp 69.50.113.147BGP routing table entry for 69.50.113.128/25, version 715Paths: (2 available, best #1, table Default-IP-Routing-Table) Not advertised to any peer 65451 65450 172.29.186.178 from 172.29.186.17...
I do receive routes from these 2 routers.Default static route is not used.172.29.186.190 is the ip address of an internal router.Well, I am trying to reach 69.50.113.147 from 172.29.186.185 .tracert 69.50.113.147Tracing route to 69.50.113.147 over a ...
