Hallo ,I have a problem with som IP Communicator through a VPN tunnel with Cisco VPN Client.Some Communicators are not registered on Cisco Callmanager. When we connected in the local LAN the Communicator are worked very fine.On the Trace with callma...
Hello,after a upgrade from Callmanager 3.2 to 3.3 my Hunt groups doesn'twork. In 3.2, it work very fine. Now I get a busy.Someone any idea to solve the problem.Thanks,Carsten
I have install a voip solution and have a following problem:Calls from mobilphone working fine Debug:Sep 4 20:12:52: ISDN Se1/0:15: RX <- SETUP pd = 8 callref = 0x5A00Sep 4 20:12:52: Bearer Capability i = 0x8090A3Sep 4 20:12:52: ...
Hello,I wanted integrated a MS Netmeeting as H323client on a Callmanager system. I have install a new Phone, selected h323 client.As Device Name: my IP addressselected calling space and so on. I give a Line-numbermapped this device by a UserNow I con...
Hello,Polycom IP Phones are certifield for Cisco Callmanager and Spectralink have wireless Ip Phones.You can Check this by:www:polycom.comwww.spectralink.comBest regards,Carsten
Hello Pambosch,by 200 Phones use Bat ( Bulk Administration Tool ). You can insert thePhones, user and Lines in one Step. With auto-registration, it is to long.Best regards,Carsten
Hello,The codec on Cisco Callmanager is standard, I have not changed it. By the Netmeeting Client have CCIT u-law 8.000kHz 8BIT MonoOkay, can you help me now ???ThanksCarsten
