Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
i am trying to do some sort of traffic policing for remote access VPN users, the scenario is that we want to evenly distribute the available bandwidth among the users.
It is to avoid any such situation where a user trying to copy a massive file ...
Hi All,I have a very simple scenario here for IPSEC over GRE but unfortunately things are not working as expected. Let me explain the connectivity. DC-RTR----------FW1----------Public Network----------FW2-----Client-RTR It is as simple as...
Hi ALL,I have configured a service with a VIP listening on 443, at the minute both servers at the backend are using self signed certificates but eventually SSL will be terminated on ACE.My requirement is to configure sticky sessions using http-cookie...
Hello Guys,Hope you are all doing well, i need some help in setting up my https health monitor for real servers. I am configuring it on ACE appliance 4710 but the probe appears failing.The VIP is listening on port 443 and 8080, the cert is not upload...
Hello All,I have setup a DMVPN between site A and site B, site A is the headend of the DMVPN and site B is branch. The problem i am encountring is one way speed, when i use ftp or sftp client to copy file from site A to Site B i am only getting 400-5...
you can use this command to copy the image to ASA over the VPN tunnel.copy tftp://IP_Address_of_TFTP/asa9-12-4-54-smp-k8.bin;int=INSIDE disk0:/asa9-12-4-54-smp-k8.bin
Hi Arjunselvi,
Yes your proposed design is fine, your 5Ks are logically one device so it is not an issue.
On the F5 side under network you will create your Trunk with multiple interface in it.
Regards,
Amjad Hashim.
Hi Richard,
As far as i understand the src NAT in ACE is applied to outbound interface, so i think you should move your nat pool statement to VLAN 160 and also change your nat application under service policy to vlan 160. Hopefully that will resolve ...
I have also noticed that on HUB router i am seeing NHRP registration messages with private IP addresses.ep 11 16:26:27.211: NHRP: Receive Registration Request via Tunnel0 vrf 0, packet size: 107*Sep 11 16:26:27.211: (F) afn: AF_IP(1), type: IP(800)...
