About schwarz-michael

schwarz-michael · 08-27-2021

Hello, I still try to automate daily backup the ASA startup-config with ansible. If I run the playbook I get the following error message:fatal: [xxxxxxx]: FAILED! => {"ansible_facts": {"discovered_interpreter_python": "/usr/bin/python"}, "changed": f...

schwarz-michael · 08-31-2017

Hello,to get priority of some business applications at the MPLS WAN network I tried to configure DSCP settings (set ip dscp af31) at the routing devices in direction to the ISP MPLS routers of our departments. At the local site I have two WS-C2960XR ...

schwarz-michael · 11-14-2014

Hello I have a big problem with ASA routing,I have two locations with a ASA5515 Cluster Vers 8.2 at one side and a ASA 5525 Cluster Vers 9.2 at the other side. Both sides are connected with a server DMZ zone. At the server I have entered a static rou...

schwarz-michael · 09-06-2012

Hello,I have configured a ASA5510 for clientless access by using the ASA http bookmark. The web server require an authentication by sending a web server logon screen. If I enter the user credentials at IE7 or IE9 browser on the the web server logon s...

schwarz-michael · 04-29-2011

Hello,I have two ASA5505 Systems with version 8.3(2) for a IPSec L2L connection.I try to transfer several times a lot of data between the client and server side.For example 6 times the transaction procedure there are no problems with the data transfe...

schwarz-michael · 08-27-2021

Hello Seb,sorry, that is my first playbook and I used a found example for backup cisco configuration. For the switch environment it works well, but for the asa systems there seems to be a problem with the become method to change to the execution mode...

schwarz-michael · 11-18-2014

Hello Murali,we have solved the problem of async. routing, I will inform you: ProblemPackets specially defined for server at site-A was sporadically delivered by gateway of Site-B regardless of static routing so the server connection at Site-A breaks...

schwarz-michael · 11-16-2014

Hello Murali,thank you for your Information.Yes of course that seem to be a problem of asynchronous routing. First I have entered the explizit and supernet routes at the hsrp routers with different metrics, second I have disabled HSRP at the standby ...

schwarz-michael · 11-15-2014

Hello Murali,both firewall cluster are connected by a redundant gbit leased line.My problem is that the vpn router had a static route over FW cluster site-A, at the error situation after ten minutes or some hours I can see traffic from client at vpn ...

schwarz-michael · 09-13-2012

Hello,I have captured the traffic with IE7/8/9 , IE7 and IE9 use NTLM for authentication by sending a POST paket to the server. SRV -> Client Microsoft-IIS/7.5 http.www_authenticate:Negotiate http.www_authenticate: NTLM Client -> SRV ...

Member Since	‎10-20-2008 05:55 AM
Date Last Visited	‎09-01-2021 12:05 AM
Posts	14

User Statistics

User Activity

ASA config backup , ansible error failed to elevate privilege

Configure DSCP Settings on 2960XR and 3560C

ASA problem with routing

Problem:ASA clientless access with IE

ASA tcp "Connection timeout" after a few seconds

Re: ASA config backup , ansible error failed to elevate privilege

Hello Murali,we have solved

Hello Murali,thank you for

Hello Murali,both firewall

Problem:ASA clientless access with IE