We are experiencing high traffic problems on the trunk interfaces directly connected to our Switches-Core, causing robotics call and slow systems.At first we thought it was broadcast or loop problems but we note that this happen when a DB server runs...
We have two switches 4500 connected together via 802.1 trunk. We have a server with 4 NICs capable of LACP. We connected 2 NICs to one Switch and the other 2 NICs to the other Switch. The interfaces of the switch are in access mode in a VLAN. The 4 ...
Hello Experts, I want to implement PBR on two VLANs of our L3 Switch and I need to know if that goes to have a huge impact in the perfomance of the Switch. Also I want to know if the PBR affects all the traffic of the VLANs or just impact the packet...
Hello Experts, I want to implement PBR on two VLANs of our L3 Switch and I need to know if that goes to have a huge impact in the perfomance of the Switch. Also I want to know if the PBR affects all the traffic of the VLANs or just impact the packet...
Hello,I want to know the differences between a Switch Cisco Catalyst model WS-C2960X-48LPD-L and a Switch Cisco Catalyst model WS-C2960X-48LPS-L.In others words, what means 48 LPD-L and 48 LPS-L?
Yes, We see high amount of traffic in that interface when the server is running it’s backup jobs. During this the red trunks links have high amount of traffic until the jobs end. Also, we checked all the ports of the switches connected right below th...
This suggests the server nics are teamed together - Can you confirm please? Yes. The server NICs were teamed together, so we had a loop formed. Thanks for your help.
We shutdown one of the port-channel between the server and one of the switches and we continue to experience high traffic and slowness in the network. Apparently that was not the root cause of the problem. We are experiencing high traffic problems on...
The switches are connected between with a trunk link.There is only one Ip address configure on the server. The 4 Nics are logically merged and running LACP.
I have the same situation. Two switches 4500 connected together via 802.1 trunk. I have a server with 4 NICs capable of LACP. We connected 2 NICs to one Switch and the other 2 NICs to the other Switch. The interfaces of the switch are in access mode...