Hi guys,  I have Cat6500 with named ACLs matching L4 traffic configured and applied to L2 port. Software is : (s3223_rp-IPBASEK9-M), Version 12.2(18)SXF5.  I cannot use PACL as it requires a bit higher revision number software I believe.  The problem...

Hi, I have 2xE1 bundled into multilink interface, ip wccp 62 redirect in on multilink only, ip wccp 61 redirect in on fast0/0. While both serials works - everything is fine and WAAS works smoothly. (4.0.19(b14) ). Problem appeared when we had lot of ...