About PQR

PQR · 12-06-2024

What does this issue mean? - Cisco key import failed. status = 85 For Cisco 8300, I tried to import the key from ISR 2951 without success.

PQR · 08-22-2023

Can I use this antenna with 5GHz?Is 802.3bt required?I want to install it for a warehouse at one end, replacing ANT2566P4W-RS= I have RF devices 1x1 stream Please, I would appreciate your answer

PQR · 07-12-2023

I have APs C9120E with antennas model: AIR-ANT2566P4W-RSIn a warehouse where the APs are installed at the ends of each rack in a zig zag fashion. The height is 15m, will these antennas work? or is it better the AIR-ANT2513P4M-N antennas?

PQR · 06-15-2023

Hi, C1000 switch support floating routes?

PQR · 01-04-2023

Hi, please your help I have a question:When we talk about Active Gain we are talking about a signal booster.Do the cisco antennas have this integrated?For example the Aironet 2800 or Catalyst 9000 series? Because in the WLC you can manage the power o...

PQR · 08-29-2023

Hi @Flavio Miranda , thank you very much for your response, sorry for the delay in replying. I found this information, when the datasheet says it only supports 8X8 antenna, does it mean it only supports 8X8 client devices?Will it support 1x1, 2x2 O...

PQR · 08-22-2023

thank you very much for your response, I didn't understand much about 4x4 5GHz, so with the C-ANT9103 antenna only works in 8x8 5GHz? Will it impact the 5GHz performance for my devices? I was referring to the AP 9130E, if it is necessary to work with...

PQR · 08-22-2023

Yes, thanks, I found this statement on twitter and I did not understand what it means, I also ask if it is required to work with Universal POE (802.3bt). The twitter says: "Disappointing it cannot do dual 4x4 5Ghz"

PQR · 08-22-2023

Hi, thanks for your answer I see that it does support itC9130E with C-ANT9103=

PQR · 07-12-2023

Hi, thanks for the pictures, a question please and at what height is the AP with its antenna installed?What is the maximum height to place this antenna?

Member Since	‎05-31-2017 07:31 AM
Date Last Visited	‎12-10-2024 12:11 AM
Posts	26
Total Helpful Votes Received	7

User Statistics

User Activity

Cisco 8300 - Cisco key import failed. status = 85

C-ANT9103 with C9130e

C9120E with AIR-ANT2566P4W-RS

C1000 route

Active Gain in Cisco Antennas

Re: C-ANT9103 with C9130e

Re: C-ANT9103 with C9130e

Re: C-ANT9103 with C9130e

Re: C-ANT9103 with C9130e

Re: Installation Examples