Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I am currently creating a lab of SD-WAN but having a hard time to connect all these devices. My concern is that the eth1 is not going up even i use the no shutdown command. Please guide me if I am doing it wrongly.
I am currently studying CCNP Route and doing some labs here in Digitaltut website.
Kindly enlighten me which interface should I choose to be the reference for the redistribution for R3
f0/0 or f1/0?
I tried to use the parameters of f1/0 and I ca...
I am wondering why does my Ping at first shows Success rate is 100 percent (1000/1000)
and then when I try it for 3 consecutive times it will show a packet drops?'
I would like to expand my knowledge how to read properly ping and traceroute.
1.) How...
Hi guys, I want to ask for your expertise to help me troubleshooting my simple topology, kindly refer to the image.I have a connectivity from my DHCP pool but when I try to search in the internet it failed to reach google and I decided to capture con...
Hello Cisco Community,
I am currently deployed in our affiliate company and having a trouble how to manage our umanaged switches, the scenario is this
->All IP addresses are statically configured per workstations (192.168.19.X and 192.168.60.X) we a...
Sorry for the confusion, I mean for the R3 configuration, they use the interface fa0/0 for redistribution.
I tried to use the interface of fa1/0 parameters and still able to reach the loopback.
why did they use the interface of R3 fa0/0?
Lab s...
Hi Thomas,
Can you cite an example for this?
* You may see high response times if the router CPU utilization is high when the pack arrives on the ingress interface. Causes inaccurate response times not directly associated with network latency.
