Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I know this is an old thread, but since so many have asked and with a recent development on this front, it is pertinent to share that IPSK with NPS is now supported on MR 30.1 and higher firmware when using both the RADIUS standard AVP Tunnel-Passwor...
Hi,NAT mode 'breaks' roaming and isn't recommended if you need to roam. See https://documentation.meraki.com/MR/Client_Addressing_and_Bridging/NAT_Mode_with_Meraki_DHCP#Common_Problems. It hearkens back to the early Meraki days and was designed for g...
Hi,Probably just the problematic one for now. One other thing to note about disabling 11ax is that currently it doesn't work when using the "Per SSID" band selection setting on the RF profile. If you're using the "Per AP" setting, then it'll work on ...
Hi,I would confirm with Support in your case that all the APs are indeed running 26.6. There might also be something else going on with that one AP which they can take a look at if it's online. The AX HE advertising issue doesn't exist in 26.4 (I jus...