Great to know it worked.
It should have...
Because you got a correct solution based on the topology and the requirement you shared.
Now.... first thing first.... Since the above suggestion worked for you... mark that post as helpful/ (It will only en...
Hello,Check the following things.1) are you able to ssh into the devices locally (from within the LAN).2) Check the SSH configuration on switch.3) ACL (on all the devices involved)4) check zones/security settings (firewall)......... finally Dont forg...
You may consider First Hop Redundancy Protocol (FHRP) GLBP... (GLBP OverView) https://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/ft_glbp.html.
(GLBP allows packet load sharing between a group of redundant routers)Other options...(VRRP O...
If you are not willing to push yourself. I'd suggest you outsource the task or find a new recruit.Life of a network engineer is not easy and smooth all the time.Learn to push yourself. Amit,If the staff is over smart, I'd suggest you to use the follo...
FW(IP)-----(SW-Vlan-IP)-----host(IP) -this host will have default gw of FW, is it okay?
Hello,
It will be nice if you mention the IP addresses of the devices involved in your setup (from start to end) Or at least what you intend them to be.
This ...