Do I need to install the upgrade file to the publisher and subcriber or just the publisher cucm? ... View more

One of my remote branches has 7 7942s plugged into a 2960 POE and then to a 2901.  The computer are connected to the telephone tandum. 1.All the phones dont drop at the same time (maybe 2 or 3 together) 2.The VPN Tunnel never drops when the phones lose the CUCM.(Computers are still online and able to see the network on other side of tunnel) 3.The computer that is connected to the dropped phone does not lose connectivity to the inside network or thru the vpn tunnel (whether in fallback mode or connected or in transit) 4. when a couple of phones are down, I can reach both CUCMs. (Publisher and Subscriber) Any help would be appreciated. ... View more

There are is no "auto qos voip" macros on this switch.  Does nayone know what the commands are for setting up qos on these switches?  I treid to copy the qos lines from another 2960 with the qos lines already in the config, but they dont all seem to be included in the ios. Do I need to upgrad the ios of the switches? It didnt accept all of them. Anyones help would be appreciated. ... View more

FIrst off, Id like to apologise for this being long-winded.  Ok.  I have two 2811s.  One with ios 12.4 and one with 15.1 advip services.  Ive built the configuration to match each other excatly.   The 2811 with 12.4 brings up all of my vlan segments fine.  Some of my vlan end routers are 1861 with ios 15.1 also, the others are 1811s.  When i install the 2811 with 15.1(which is my data center router), All of the vlan came back up except for the branches with the 1861s in them.  What am I missing??  Is there some licensing thing that eludes me? 2811 ios: c2800nm-advipservicesk9-mz.151-1.T2 1861 ios: c1861-advipservicesk9-mz.151-1.T2 Thank you in advance. ... View more

The Base license support 10 inside Hosts.  My company needed to purchase a license that supported 20 inside hosts.  It looks to me like they bought the wrong license or I am wrong.  The new license file says 10 inside hosts, not 20.  I need you guys to validate this for me.  If I install the license, will it add the base 10 hosts and the additional 10 hosts because of the new license file?  The new license file info from the cisco email ----> Inside Hosts                   : 10 Failover                       : Enabled VPN-DES                        : Enabled VPN-3DES-AES                   : Enabled Security Contexts              : Default GTP/GPRS                       : Disabled SSL VPN Peers                  : Default Total VPN Peers                : Default Advanced Endpoint Assessment   : Disabled AnyConnect for Mobile          : Disabled AnyConnect for Cisco VPN Phone : Disabled Shared License                 : Disabled UC Phone Proxy Sessions        : Default Total UC Proxy Sessions        : Default AnyConnect Essentials          : Disabled Botnet Traffic Filter          : Disabled Intercompany Media Engine      : Disabled ... View more

I need help coverting a config from one to the other.  Any tips of hints. I need your help guys.  Im guessing I have to rebuild this thing from scratch which seems a bit complex since the asa has alot more features, but it is still just a firewall.  Ive exported a copy of the config from the 50A, but I cant find a way to translate it to the 5505. Ive loked at all the settings pages from the fortigate device, but I still get lost in setting up the 5505 correctly. ... View more