Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, we have running two Cat 4510 with four SUP8-E. The SUPs in slot 6 in both chassis are stopped in ROMMON and VSL was working fine and all ports are up and correctly aggregated.In chassis 1 are ports Te1/5/1 and 1/6/1 bundled in etherchannel 64....
Hello, I have a problem with asymetric routing for a host in our network. A connection comming from www to the host is going through a third party utm appliance to the host 10.10.10.99. The default gateway is a cisco asa 10.10.10.1. In the log of the...
Hello, I have an asa 5525x cluster on perimter and an asa 5545x as an internal firewall.I have the problem accessing extenal http websites that should be redirected to https. Most times the error "Website could not be loaded". On a windows client it ...
Hello, I have an asa 5545-x cluster with running version 9.12(2) and this is the default gateway for all vlans. Now I would like to wake up some clients from our distribution server in vlan 5 with ip address 192.168.5.20 some client in vlan 10 192.16...
The config has not been changed and the interfaces are configured in the correct port-channel interface TenGigabitEthernet1/5/1
description VSL
switchport mode trunk
switchport nonegotiate
no lldp transmit
no lldp receive
channel-group 64 mode ...
