Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hey Peeps,
So I'm running a fully patched version of Prime 3.2.2. I'm trying to run a cli template for a wireless controller to download a file to it (there's no pre-created template to do it). So when I get to the interactive part, the template ...
Is the command: "config redundancy link-encryption" only available in a ldpe image? Or is there a prerequisite command that needs to be applied first before the command is available? In a normal 5508 image, that command is no where to be found.Than...
Hi all, Google's my buddy, but couldn't seem to help me out on this one. When I have a pair of 5508 controllers (running 8.0 code), and the primary sends a config update to the secondary, how is that encrypted? DTLS? thx for any helpful info.
Hi all, Got a cat 3850 switch acting also as a wireless controller. Running 3.6.0E One thing that I've noticed is that loading the web interface to configure it is terribly slow. Also for guest authentication, it takes a long time for the web page t...
Hi all,So got a 3850 running 03.03.04SE. Trying to set up platinum QOS for voip on a wlan.When applying platinum, I get this problem:QoS Service Policy - Input Policy Name : platinum-up Policy State ...
So I decided to try the multicommand method instead and that worked. I don't know why I didn't try it to begin with... Anyway, this is what worked:
transfer download serverip 192.1.1.100transfer download filename login.tartransfer download datatype ...
The command is not there.. I've tried multiple images. Here's the proof:(Cisco Controller) >show redundancy summary Redundancy Mode = SSO ENABLED Local State = ACTIVE Peer State = STANDBY HOT ...
Thanks Sandeep. So I'm running 8.0.120 code. The command:"config redundancy link-encryption enable"is not present in the cli. Does anyone know if this is a bug/feature? thx,Nick
Hey thanks for the reply Rasika. Yes, I'm aware that the GUI isn't quite there yet. However for the webauth, I would expect it to be somewhat fast. The webauth file is custom, but small.Here's the contents of the flash directory and some config:38...
