Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HelloI have been struggling to get his working ; Our Setup is PSTN terminated on Nortel.SIP Trunk between Nortel and cisco .SNOM SIP Phones terminated on Cisco CME Version 7.1Cisco IP Phones are also terminated on Cisco CME.When I enable "RTP Encrypt...
HiI had seen some design with 2 Core and edge-switch is connecting to 2 core.what configuration is done on Edge-switch to connect to 2 Core, how does it avoids Loop.Another Scenario would be One Core and multiple of edge-switches. Each edge-sw connec...
Hello Netpro,We are terminating multiple Internet Links on a dedicated 2960 switch not connected to our LAN.we need to monitor the link utilization using SNMP.Question : how can i connect this switch to LAN without compromising securityThanksNasr
Hello NetproI need to publish a website on a DMZ Server with Active Directory authentication. Its not a public website.I need to understand the advantages/disadvantages of publishing with SSL and without SSLthanksNasr
HiIs it possible to check from CME console for SIP Trunks activity ( Up/Down/Errors )How to check which dial-peer is used for calls originating from PSTN to endpoints terminating on Cisco.PSTN is terminated on Nortel ; SIP trunk is between Nortel & C...
Hi Jon,What device routes your vlans within your LAN : 4500 L3 switch Internet Link terminates on 2960 Switch ; one leg from the switch terminates to a Router which connects to 4500 for internet connection.Due to some specific requirements we take a...
