About moin.tirmizi

moin.tirmizi · 04-04-2016

Hi There, I am not sure If I have chosen the correct forum, Appreciate if someone can suggest the correct forum name If this is not the correct one. Here is the summary on the help I need. I have an ASR 920 IOS XE router , now I have not configured a...

moin.tirmizi · 04-18-2010

Hi All,I am using an AA script in CUE and have a requirement when user press "1" in the AA. He needs to be transferred to an external number(Mobile number).The "Call Redirect" function allows calls to be transferred to internal extension only and no...

moin.tirmizi · 04-15-2009

I need an EEM script to place an ACL on the WAN when the link is flapping to block the router from reaching the CM server for a period of about 20 minutes.My requirement is to setup a flag which will have a counter incrementing for each Link flap det...

moin.tirmizi · 04-21-2010

You are right Mark,That's the work around I was using before, but as I mentioned its just one router no transferring calls. I'll check to see why as it should. Thanks ofr your advice.

moin.tirmizi · 04-20-2010

Yes you ar right mate.Only one of my router is not forwarding the call, as I dont see any call origination in CCAPI debugs I suspect its CUE not sending the call. I tried on couple of other site routers and they both allowed external transfer.

moin.tirmizi · 06-11-2009

Thanks Joe for your help in getting this script working for my screnario.

Member Since	‎03-23-2009 06:40 PM
Date Last Visited	‎10-28-2020 07:23 AM
Posts	7

User Statistics

User Activity

ASR 920 ISO XE command help

CUE script to allow PSTN calls

EEM script to detect WAN flapping event

Re: CUE script to allow PSTN calls

Re: CUE script to allow PSTN calls

Re: EEM script to detect WAN flapping event