Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
So, you can attach a multiplier to a multicharacter sequence like so:(ab)+ That mean one or more occurences of the sequence "ab"But what if I want to match on a string that does NOT have this sequence? Like I want to match on a static route in a co...
I have an SDLC-attached FEP, and I am doing reverse-media translation to the secondary which is on a remote token-ring LAN.Whenever they bounced the FEP port, it takes 15 minutes or so to recover. Is there a timer or other setting I need to configur...
What is the difference between these commands?"sdlc role secondary"and "sdlc address c1 seconly"If you understand the difference, please respond and help me understand. I'm interpreting the (vague) documentation as saying these both do the same thin...
(a) I see some documentation on Cisco's website that the particle size is 576 or 580 bytes, but I see other documentation that say only 512 is usable by the user and that the first 64 bytes in the first particle is reserved. Does anyone know what th...
Right... I think we are going to filter on source MAC address on the opposite "sides" of the loop, if you know what I mean by that. Why did the Test P/F seem to work? I am curious about that. Is that translated to a simple sort of ping/oam betwee...
This issue has been resolved as bridging loop which was formed by a backside link between two different customers of ours, and a third-party. This was a surprise to me, because we were seeing the TEST frame P/F just fine...I have a question, what MA...
It did not fix the problem.I am sending some new captures shortly. In this case, we see 1-for-1:CANUREACH (TCP) ---><--- ICANREACH (TCP)Both ends show that the MACs/SAPs are found in the DLSw reachability cache. I see XIDs coming in from the second...
Ok..Well, I have a trace which will show that the secondary unrelenting sends XIDs every five seconds or so when it is in a failed state. That trace in the case.
Yes it is Cisco to Cisco.On the FEP/SDLC end:2811 w/ 12.4(8d) Advanced EnterpriseOn the secondary/ethernet end:7200 NPE-G2 w/12.4(15)T1 Advanced Ent w/SNASw
