Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Any help is appreciated.(1) Equipment: PIX515(2) Connection scenario:Far side WAN 10.1.2.61, PIX outside: 10.1.2.62. However, all incoming IPs from the other end are: 10.100.100.x/24(3) Need to map incoming 10.100.100.x to internal 172.30.1.x,. For e...
Any help is appreciated. Getting ready to upgrade a ASA 5520 from 7.2 code to 8.x, all because of the IPS module needs to be upgraded from 6.1 to 7.x. Two questions: (1) Should I expect a smooth upgrade (from 7.2 to 8.x) on the ASA box? Anyone runs i...
ANy help is appreciated.Getting ready to upgrade a ASA 5520 from 7.2 code to 8.x, all because of the IPS module needs to be upgraded from 6.1 to 7.x.Two question:(1) Should I expect a smooth upgrade (from 7.2 to 8.x) on the ASA box? Anyone runs into ...
Thank you for your help in advance.I've posted a few messages here before and getting helps on what I am trying to do. After actually testing it, it just flat out won't work. Here goes:I am trying to use a ME3750 to terminate an internet 10MB pipe. A...
Any help is appreciated. Will be upgrading from 10MB to 100MB ethernet for internet access. Need to know if a ME3750 will do the job. I don't need any services like ipsec, BGP,etc. No voice traffic neither. Just to use this to route to upstream ISP. ...
Thank you.From what you explained, it should work but the behavior is that the web app. we are running internally some time works perfectly and some time clients get reponses from the broiwser as connection not found or some sort (sorry don't remembe...
Thank you.From the Pix:outside IP is: 10.1.2.62, inside IP is: 192.168.1.1. The network 172.30.1.x can be reached via another router.Client will come from IPs: 10.90.90.x. They will connect to 10.100.100.x addresses.Example: client (10.90.90.1) initi...
pkampana, thank you for the info.So you are saying upgrade command does work within the IPS going from version 6.1.x to 7.x?These statement are contradictory. See above.Thank you for the help.
