Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Service Provider link terminates on the 2960 switch, one leg from the switch connects to Firewall, another leg from the switch connects to VPN Router.How do I securely connect Internet Switch to the network to monitor bandwidth using SNMP.Attached fi...
HiI got couple of dial-peer in my configuration, donno which is used for incomming and outgoing.During an active call is it possible to get the dial-peer information.Sip phone vendor wants to enable rtp encryption on CME, any help on itcheersTOM
HiFor Lab purpose I need these information.What is the minimum requirement to run CallManager on a Virtual Server.Link to get VMware image for latest CallManager Virtual Server.I got couple of Cisco Phones, Sip phones for testing features.cheersTom
Hi GuyzHere it's my question. Is it possible to configure GRE tunnel with loadbalancing while terminating two ISP link on one router at one end.Other end with Two Router terminating one isp link.Bandwidth of each ISP is different.
HelloLAB Scenario - Eigrp Load Balancing on unequal BandwidthLAB Diagram attachCan I get correct steps to enable load balancing on unequal bandwidthThanksTom
Thank you Andrew,Which site is the hub/core site? * Location_A ( Hub with 2 Routers )Note sure if its call Dual Head VPN on Same SiteHave you actually configured any of the tunnels?* tested in labsHave you got a routing protocol running over the 2 s...
thanks princeI am still not clear how loadbalancing will work as bandwidth are unequal and tunnels will terminate on different routers for redundancy, I add more details to get more input from youLocation AISP_1 terminates on R1 with Bandwidth 6MBISP...
