Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Can you setup a HA pair with (2) MX250 Firewalls long distance? We have 2 WAN circuits coming in from different sides of the building.Do they have to be near each other to that? Or doesn't matter?How would I go about this if distance is not an iss...
Hi,I am very familiar with physical stacking and what is does. I have worked with both Meraki and Cisco Catalysts for stacking.I am curious, if 2 MS425-32 Core switches that are separated by long distance inside a building where a physical stack cabl...
Hi,I currently have 2 Cisco FTD 2110 devices in a HA pair. Both FTD and FMC are running 6.4.0.3 code.My primary ISP assigned a /27 public block (100.100.100.0/27 for example) being leased to me, I do not own them.So I was able to implement some one-t...
Hi,I am trying to achieve the following;I would like certain users of client VPN only certain access to our internal VLANs.So I have a MX acting as my firewall connected to my Cisco CORE switch and Access switches downstream to our internal VLANs (LA...
Hi,I have a client that wants to collect internal data on a internal switch stack and mirror that to an security appliance device.The MS 350 switches are L2 only and are in stacks of 8. Is there anyway to capture most of the switch traffic and mirror...
Thanks all. Is there any other way besides the above?Is it either we just need to get a /24 ?or we just do a PAT to the new ISP for outbound only and the 1to1 NAT’s can not be migrated? Thanks.
